"Endur-O-Seal solves your Brick Sealer
Problems!"
Brick Sealers
by
Endur-O-Seal USA Enduroseal.com
We are probably introducing to you, products that you have never seen or
heard of before. We can say this with confidence because the market technologies
of today are allowing us to reach hundreds of new markets that have not yet been
introduced these products. They are revolutionary and proven concrete treatment
products that have amazing advantages!
Anyone who has concrete floors, concrete block walls, concrete pipes, or any
other surface made of Portland cement has problems. These problems may be water
damage, mold and algae growth, salts, urine and fecal matter (animals), acid,
juices, oil, sulfates or nitrates, etc. They may be problems of dusting,
bacterial or algae formation, soft concrete, saponification which causes vinyl
tiles, paint, polyurethane, and epoxy coatings to peel, or to cause concrete
disintegration (efflorescence), spalling, de-lamination or softening.
Today, if you have someone seal your concrete surface, they will give it a
"surface seal" with some kind of epoxy, tar coating, polyurethane, cementations
topping or paint. This type of sealing is effective for anywhere from six weeks
to maybe three years. Then it has to be reapplied again, exposing other
problems.
EOS Systems attack the problems from an entirely different approach; they
don't just temporarily cover up the problems like a band-aid fix, they provide
long-lasting sealing solutions. EOS Systems will permanently convert causes to
advantages. They are used to seal, strengthen, and condition all concrete
structures. The actions of EOS Systems take place down inside the concrete;
rather than a slight change of color (whitening), there is no visible sign of a
change on the surface.
EOS Systems are colorless or milky white penetrating products which
waterproof and preserve by causing chemical reactions in masonry that solidify
all the component parts into one solid mass. They are not a surface coating and
will in no way change the physical aspects of the present structure except some
may leave a semi gloss finish. Performance occurs within the pores of the
masonry.
EOS Systems may be applied to stucco, concrete, brick, cement block,
terrazzo, wood, walls or floors, inside or outside, wet or dry, new or old, and
unpainted.
Why? * How does it work? * Is it safe to use? * Is it hazardous? * Can I
apply it myself?
All these questions will be answered for you as you read the text. EOS
Systems were formulated for use in the world of concrete. They are a one time
treatment process for all concrete types. The data contained in this booklet
should give you a reasonable understanding of our product line.
TECHNICAL INFORMATION
ENDUR-O-SEAL USA, Inc.
Environmentally Friendly
History
The history of "Aero-Silica" goes back to the early 1900's and has been used
successfully for many years by architects, designers, engineers, contractors
and project owners. In the mid seventies with the availability of newly refined
chemicals, Endur-O-Seal (EOS) was re-formulated for enhanced penetration and a
deeper penetrating seal. With today's shrinking world, expanding construction
growth, modern communications and marketing technologies, this product is being
made available to the world market demands. Over the many years of use, this
product has been used in major dam projects, thousands of schools, commercial
and industrial facilities, state, county, city agencies and by untold numbers of
residential users to resolve and avoid all types of cementations problems.
About The Product
EOS Systems are water-borne sealants made specifically for concrete in order
to solve the damaging problems caused by water, acid, oil, reactive aggregates,
blood, fat, or problems resulting from dusting, algae formation, soft concrete,
saponification, or simple efflorescence.
EOS Systems are used to seal concrete flooring, walls, blocks, pipes, or
other concrete substances. Where top coatings only protect the top surfaces of
concrete, EOS Systems solves the problems of concrete from the inside out. All
the action by EOS Systems takes place down inside the concrete slab or
structure, instead of just on the surface.
How do EOS Systems work? When EOS Systems are sprayed (with an ordinary
garden type sprayer) on the surface and spread with a fiber brush, to avoid
puddling, it penetrates the concrete. When it comes in contact with the alkali
inside the concrete, within about eight seconds it forms a cold permanent
compound in the form of a gel. This gel expands inside the pores sealing the
pores and hairline cracks, emulsifying most foreign matter, and purges it to the
surface to be washed away. This makes EOS Systems effective immediately. The gel
will continue to purge foreign matter to the surface until it has been removed
from inside the concrete. The gel will turn the surface flint hard in about 90
days, filling pores and hairline cracks, thus turning the concrete into a solid
mass that resists the penetration of destructive pollutants.
ENDUR-O-SEAL USA, Inc.
The Ultimate For Concrete Sealing & CONDITIONING
v Preserves the Life of Concrete in High Moisture, High Corrosion Areas
by Preventing the Concrete from Deteriorating.
v Revitalizes Old Weathered Concrete, Seals and Preserves Weathering
Concrete from Acid Rain, Pollution, Freeze/Thaw Cycles, and Enhances any Bonding
of Coatings or Repairs.
v Retains the natural Non-Slip Surface of Concrete.
v Stops Concrete Dusting.
v Allows for Low Maintenance Cleaning.
v Aids Concrete Curing.
v Retards Capillary Seepage.
v Stops Alkali Problems.
v Aids the Floor Covering Trade.
v Aids the Paint Trade.
v Stops Wall Sweating Problems.
EOS Systems are great for: Basements, Sewage Plants, Elevator Shafts, Patios
and Pools, Zoos and Hatcheries, Sidewalks and Driveways, Silos, Parking Decks,
Roadways, Buildings, Bridges, Tunnels, Kennels, Granaries, Curbs, Wheelchair
Ramps, Gutters, etc.
ENDUR-O-SEAL USA, Inc. IS DESIGNED FOR ALL INDUSTRIES
EOS in Your Industry
v Hog, Poultry, Seafood and Dairy Industry.
v Meat/ Fowl/ Seafood Processing.
v Warehousing/ Manufacturing Facilities.
v Chemical, Pharmaceutical, Fruit and Citrus Plants.
v The Agriculture Industry - Citrus, Juices, Vegetable and Food
Processing/ Warehousing.
v Construction Contractors. Commercial, Industrial, Apartments,
Residential
v Highway Barrier Walls/ Retaining Walls.
v Coal Mines/ Gold Mines/ Potash Mines
v Marinas-Walkways-Bulkheads-Floating Docks - Catwalks
v Food Commissaries.
v Lumber Industry/ Paper Mills.
v Oil Companies.
v Fertilizer Manufacturing/ Handling Facilities.
v Block Wall Structures.
v Grain Handling Facilities.
v Commercial Ice Houses.
v Meat Packing.
v Food Processing Plants, Restaurants
v Apartments - Sidewalks - Balconies - Walkways - Slabs
v Machine Shops.
v Parking Garages - Concrete Decks - Ramps
v Assembly Plants.
v Chemical Recycling Facilities.
v Power Generation Facilities. - Turbine Rooms - Water Treatment -
Cooling Stations
v Acid Washing Facilities - Floors - Walls
v Grocery Stores/Sugar Plants.
v Battery Manufacturing Facilities.
Performance Features
1. Ordinarily, EOS Systems are applied in two or three separate and
successive applications, from 1 to 24 hours apart, according to how fast the
concrete will absorb the product.
2. You can walk on the concrete surface immediately after the EOS
Systems have been is applied because all of the action is below the surface of
the concrete.
3. The concrete does not have to be dry for EOS Systems to effectively
penetrate and perform satisfactorily; in fact, some require the surface to be
damp.
4. EOS Systems reacts with the alkali within eight seconds, becoming
effective immediately.
5. Purging can continue for a few hours up to 10 days according to the
amount and type of pollutants inside the concrete.
6. Set time between applications can vary from 15-20 minutes to 45
minutes according to the age and porosity of the concrete.
7. Spread rate: Ordinarily, one gallon will treat 300 square feet with
one application. Three applications will cover 50 to 150 square feet.
8. It reduces dusting, stains, efflorescence, and saponification.
9. Re-conditions and strengthens old deteriorated concrete and adds
several years of useful life, saving costly replacement.
10. It strengthens, tightens, and seals deteriorating mortar between
bricks and
concrete blocks.
11. It helps to form a better, long- lasting bond between old and new
concrete and any type of topical floor coating.
12. Resists the penetration many liquid pollutants.
13. Resists cracking, crumbling and pitting.
14. Its actions and results are permanent.
15. Deters paint from peeling off concrete.
Guarantee
1. Resists the penetration of water, oil, acids, juices, and other such
liquids.
2. Retards acid erosion and disintegration of concrete.
3. Retards dusting and pitting of concrete caused by traffic.
4. Increases densification and surface hardness.
5. Increases compression and flexural strength of concrete.
6. Where concrete is internally saturated with oil, acid, juice, and
other such material, EOS Systems will emulsify nearly these contaminants and
purge them to the surface to be washed away.
7. Resists the formation of algae and mildew.
8. Restores most of the natural color to the concrete. (Whitening effect)
9. Forms better bond between old and new concrete, excellent for prepping
or patching.
10. Resists additional internal hairline cracking of concrete.
11. Stops topical coatings from peeling and burning off, and tile bonding
glues from releasing caused by the saponification process.
WARRANTY - If applied
according to instructions, Endur-O-Seal USA, Inc. warrants that its'
products will perform as represented. Since methods, times and conditions of
use are entirely beyond its control, this warranty is limited solely to the
quality of the Company's products and replacement of such products which
prove to be defective. This warranty is good for 20 years from application
date. Endur-O-Seal USA Inc. shall in no way be responsible for any acts of
nature; inferior concrete, such as, but not limited to cracks or voids
resulting prior to and/or after product application.
ENDUR-O-SEAL USA, Inc. warrants EOS Systems to perform as stated, when used
and applied as specified. Follow the directions and have a good surface prep,
this is the only way. Concrete surfaces have different densities so prep and
apply accordingly.
WHY ENDUR-O-SEAL?
All foreign matter is cancerous to concrete and masonry. Foreign matter is
water, acids, alkali, oil or certain minerals absorbed or spilled on the
masonry: such as lactic acid in milk, alkali, chemicals, etc. These cancerous
substances embed themselves in masonry creating rutting, pitting, crumbling,
cracking, and dusting.
EOS Systems applied to masonry, concrete, plaster, and stucco will react as
follows. The reaction of
EOS Systems with the alkali found in masonry is an expansive gel compound.
This expansive gel is chemically forced into the pores and by capillary
attraction is absorbed into the voids that exist within all concrete. This
process repeats itself until the masonry is entirely sealed. This reaction also
purges most foreign matter to the surface, where it can be removed, thereby
removing the cancerous particles from the masonry. This process will stop
hairline cracking, crumbling, and pitting and also increase the density of the
masonry. This will permanently waterproof and condition your concrete.
General Discussion on Concrete
Concrete
is an expensive asset that we must protect, maintain, and preserve to reap its
cost effective and lasting benefits. Concrete is a man-made construction product
made by combining cement (containing lime), sand, gravel and water. As these
components begin to cure, the water is expelled during dehydration leaving what
we call pores in the concrete. Thus, it is comparatively a porous mass held
together by the embedded steel. These pores then set the stage for water and
many other pollutants to penetrate into the concrete destroying the concrete and
corroding the steel. If the liquid pollutant freezes, the expansion will split
the mass or spall the surface, weakening and/or destroying the structure.
The pores set up a strong capillary action which wicks water and minerals out
of the ground (up to 20 feet). As the water passes through the concrete, it
picks up the free lime and alkali in the concrete that was left over from the
concrete curing process. The alkali reacts with any surface sealant such as
polyurethane, epoxy, oil based paint, and adhesives and causes "saponification".
This then causes the surface sealant to separate, leaving the concrete exposed
to the decaying effects of
We borrowed the word alkali from the Arabs to whom it meant, "the ashes of
the Saltwort plant". Alkali is never pure and rarely stable. It is made up of a
combination of elements, and almost always reacting with other elements. To
break down the elements into chemical terms, we refer to the periodic chart of
elements. We start with hydrogen; then lithium, sodium, potassium, rubidium, and
cesium; with a part of francium. Francium is a radioactive element with a
half-life of only 20 minutes. The other five are very active alkali metals. Each
element has electrons and molecules which are always eager to take part in
chemical reactions with other elements. The two most important alkali metals are
sodium and potassium. We find a hint of them in potassium carbonate and sodium
carbonate. Sodium makes up 2.6% of the earth's crust and potassium makes up
2.5%, yet we never see them because they are always found in combination with
other elements.
The increased use of concrete sub-floors in direct contact with the ground
makes it more important than ever to understand the moisture and alkali content
in these sub-floors. The effect on the surface sealers (paints) and floor
coverings are problems that we have faced for many years in the construction
world. Well known as the "Alkali Problem", this condition is primarily a problem
of moisture. Alkali is present in every concrete slab and is more detrimental
with moisture. On adequately ventilated suspended concrete sub-floors, moisture
is not present in troublesome quantities. Where the slab is in direct contact
with the ground or a poorly ventilated airspace, moisture is brought up through
the slab by capillary action. It dissolves the alkali salts in the concrete and
appears at the surface as a destructive solution.
The most serious difficulty caused by alkaline solutions is the chemical
reaction, "saponification". This is essentially the same reaction that takes
place when certain oils or fatty acids are mixed with alkali, as with the
manufacturing of soap. Although moisture and alkali conditions may vary greatly,
there is always sufficient moisture in the ground and alkali in concrete to
present an "Alkali Problem" on the sub-floors that are affected by the ground
moisture. It is never safe to assume that a concrete slab will always be dry
because it has been dry for several years. In many cases a concrete floor will
seem to be dry because the moisture content is very small and evaporates into
the air as soon as it reaches the surface. When a floor coating is applied,
evaporation is prevented or retarded and the alkaline solution collects under
the coating or floor covering and starts destroying the coating.
Porosity
Webster's New World Dictionary defines porosity as, "Being full of pores, or
tiny holes, through which fluids, air, or light may pass."
Normally, concrete is a mixture of four basic ingredients: sand, gravel,
cement, and water. In the mixing process, as certain amount of air is mixed into
the concrete. The water and air take up space inside the concrete even after the
concrete is poured in place and during the early stage of setting.
When
the concrete is "worked" in place and begins to polymerize, the heavier
ingredients have a tendency to settle to the bottom and the lighter ingredients
have a tendency to float to the top. Water being the lightest of the four basic
ingredients, floats to the top and is evaporated away, or is squeezed out the
sides or bottom. As the water is squeezed out, it moves in all directions.
Water, being a solid in that it takes up space, leaves millions of small
rivulets and pores crisscrossed in all directions.
These small rivulets or hollow spaces tie together creating what we call
pores or capillaries. Quite often the pores create hairline cracks inside the
concrete, weakening the concrete. When the capillary action draws water up into
the concrete, or rain hits the side of a concrete wall, or water hydrology bears
against a concrete basement wall, the water travels via these pores through the
concrete.
The pores are interwoven and interconnected, thus allowing a slow seepage of
water through the concrete. The denser the concrete, the tighter the pores, and
less water is allowed to pass through.
A pad of concrete may resist 80-90% of the water trying to soak through. For
this reason, a concrete sealant need not resist 100% absorption of water through
the concrete. If the sealant can resist only the percentage which the concrete
itself can't resist, then the sealant has effectively sealed the concrete pad or
wall.
With respect to wall sweating, it should be remembered that the surfaces of
most common masonry building materials have an affinity for water molecules. The
water molecular film is proportionate to the relative humidity. At the
saturation point all voids, pores, and capillaries become completely filled.
When the atmospheric condition, inside or outside, which caused the excess of
moisture in the first place, is not alleviated, the porous wall may be filled to
saturation point with moisture in liquid form. This condition then provides an
excellent opportunity for vapor travel within a wall. The vapor may strike a
cold area or dew point, and condense in sufficient quantities to reach the
interior wall surface and appear as wall sweat or bleeding. Each of the above,
if allowed to go unchecked, can be responsible for heavy maintenance costs by
causing peeling paint, spalling, formation of mildew, and efflorescence. All
porous masonry wall materials do the same thing, unless proper steps are taken
to avoid it.
Plasticizer Migration in the Flooring Trade
One of the major problems facing the floor covering industry is plasticizer
migration. That is, the movement of substance from one product into another
product, so as to create product deterioration. This product deterioration can
take on many forms such as: softening, cracking, blistering, peeling, de-lamination, loss of strength, etc.
Today, many floor coverings are laid on a concrete base. The owner has 2
options. First, lay the floor covering on the bare concrete. Or second, seal the
concrete before laying the floor covering. Let's examine these 2 options.
First. If the floor covering is laid on bare concrete, there may be a
migration of the alkali, other salts or any foreign material down inside the
concrete, such as oil, which may attack the adhesive (if used) or the floor
coverings directly. These salts will be brought to the surface in a water
solution through either capillary action or subsurface water pressure below.
Also, any oils, acids, or other such foreign materials down inside the concrete,
will migrate to the surface where it will attack the adhesive or the floor
covering directly. Subsurface oils may take months to show up at the surface, to
attack or discolor the floor covering.
Second. If the concrete is sealed, another set of detrimental factors will
start to emerge. The concrete sealants used today are cementations membranes,
polyurethane, epoxies, or oil-based paints. These concrete sealants have 2
things in common. They are surface sealants, and are retro-chemical based. There
is a good possibility of a plasticizer migration directly from these surface
sealants to the adhesive or floor covering. Also, the alkali or pollutants in
the concrete will cause saponification, eventual disintegration or release from
the concrete surface which brings on long range problems and excessive costs.
Up until the present time, the above conditions have been the state of
technology throughout the floor covering industry. Now the applicator has a
third option, a solution to the problem, EOS Products, a highly effective
penetrating internal sealer.
Endur-O-Seal
USA Inc. manufactures a full line of products that are designed to economically
protect concrete, brick and masonry. All EOS Systems are designed for long
lasting protection, safety, ease of application, superior and even permanent
concrete protection
EOS Pre-sealers are manufactured in four mixtures; Homeseal is used on green
concrete and applied directly after the trowling process. Hydra Seal and Hydra
Loc are used on wet concrete, extremely porous concrete were water is coming
through <hydra-static pressure>, or where the concrete is soft and dusting.
HydroBlok is used on CMU block walls.
HOMESEAL is a Sodium silicate pre-sealer that prevents dusting and
efflorescence. It is a waterproofing concrete pre-sealer that will never stop
working as it becomes part of the concrete matrix, strengthening your concrete
by expanding in the pours and capillaries. This sealer is commonly recommended
for finishing basement walls and floors that are LESS than 6 months old.
HomeSeal is most frequently used in conjunction with NCS-20 Negative as a final
top coat application. Typical uses for HomeSeal when you have porous concrete,
smooth finished floor, soft chalking concrete or serious existing water
migration problems. Good for interior or exterior conditions.
It can be applied to; (1) Plant or Office Floors, (2) Warehouse Floors, (3)
Industrial Facilities, (4) Basement Floors, (5) Garage Floors, (6) Concrete
Patios and Retaining Walls, (7) Anywhere that you have Concrete.
HomeSeal does a lot more than just waterproof your concrete. It solves
potential health problems associated with a damp slabs or wet basements.
Migrating moisture creates a breeding ground for mold spores and mildew not to
mention that "damp musty odor". Endur-O-Seal can greatly reduce the health risks
associated with the transmission of Cancer Causing Radon. It stops Radon before
it enters your home unlike fan systems that allow it in and then vent it back
outside
HYDRASEAL is a Sodium silicate pre-sealer that prevents dusting and
efflorescence. It is a waterproofing concrete pre-sealer that will never stop
working as it becomes part of the concrete matrix, strengthening your concrete
by expanding in the pours and capillaries. This sealer is commonly recommended
for finishing basement floors that are 6 months to 24 years of age.
HydraSeal is most frequently used in conjunction with NCS-20 Negative as a
final top coat application. Typical uses for HydraSeal when you have porous
concrete, smooth finished floor, soft chalking concrete or serious existing
water migration problems. Good for interior or exterior conditions.
It can be applied to; (1) Plant or Office Floors, (2) Warehouse Floors, (3)
Industrial Facilities, (4) Basement Floors and Poured Walls, (5) Garage Floors,
(6) Concrete Patios and Retaining Walls, (7) Anywhere that you have Concrete.
HydraSeal does a lot more than just waterproof your concrete. It solves
potential health problems associated with a damp slabs or wet basements.
Migrating moisture creates a breeding ground for mold spores and mildew not to
mention that "damp musty odor". Endur-O-Seal can greatly reduce the health risks
associated with the transmission of Cancer Causing Radon. It stops Radon before
it enters your home unlike fan systems that allow it in and then vent it back
outside
Concrete Sealing Products
HYDRALOC – a Sodium silicate pre-sealer that prevents dusting and
efflorescence. It is a waterproofing concrete pre-sealer that will never stop
working as it becomes part of the concrete matrix, strengthening your concrete
by expanding in the pours and capillaries. This sealer is commonly recommended
for finishing basement walls and floors. HydraLoc is heavier in solids than the
HydraSeal in order to be used on concrete that is older than twenty-five years
of age. HydraLoc is most frequently used in conjunction with NCS-20 Negative as
a final top coat application. Typical uses for HydraLoc; when you have porous
concrete, a broom finished floor, soft chalking concrete or serious existing
water migration problems. Good for interior or exterior
conditions.
It can be applied to; (1) Plant or Office Floors, (2) Warehouse Floors, (3)
Parking Decks, (4) Industrial Facilities, (5) Basement Floors and Poured
Walls, (6) Garage Floors, (7) Sidewalks and Driveways, (8) Concrete Patios
and Retaining Walls, (9) Anywhere that you have
Concrete.
HydraLoc does a lot more than just waterproof your concrete. It solves
potential health problems associated with a damp slabs or wet basements.
Migrating moisture creates a breeding ground for mold spores and mildew not to
mention that "damp musty odor". EOS Systems can greatly reduce the health risks
associated with the transmission of Cancer Causing Radon. It stops Radon before
it enters your home unlike fan systems that allow it in and then vent it back
outside
HYDROBLOK
is a pre-sealer produced specifically for sealing heavyweight CMU (concrete
masonry units). This is a user friendly product that will seal CMU structures
under the most difficult conditions and leave the concrete blocks paint-able if
desired. This spray on product is designed for new or old heavyweight CMU
structures and will seal your blocks easily and effectively.
NCS-20 NEGATIVE is a silicone membrane forming sealer used to drastically
reduce your concretes hydrostatic pressure. It is frequently used prior to
installing new flooring in conjunction with any of our pre-sealers. NCS-2O
Negative is specifically used where there is high moisture migration with high
negative side pressures. It provides long lasting protection against; (a)
efflorescence (alkali salts and lime leaching), (b) staining due to atmospheric
carbons, (c) algae, (d) mildew, (e) rust, (f) salts, (g) chloride penetration,
(h) corrosion, (i) acid rain, (j) dampness, (k) waterproofing difficult
basements or (l) below grade building walls and floors or parking garages with
water related damage. It can be applied to;
(1) Pre-cast Concrete, (2) Concrete Masonry Units, (3) Poured in Place
Concrete, (4) Concrete Historical Structures.
CS-20 is a molecular aqueous based penetrating polysiloxane sealer that
protects against; (a) efflorescence (alkali salts and lime leaching), (b)
staining due to atmospheric carbons, (c) algae, (d) mildew, (e) rust, (f) salts,
(g) chloride penetration, (h) corrosion, (i) acid rain, (j) dampness, (k)
waterproofing difficult basements or (l) below grade building walls and floors
or parking garages with water related damage. CS-20 is frequently used on
commercial kitchens and garage floors over HydraSeal or HydraLoc where the
customer wants rapid water shedding, beading or easy ice removal. CS-20 is
recommended to be used in Northern states where protection against road salt
used during snowy seasons.
It can be applied to; (1)
Pre-cast Concrete, (2) Concrete Masonry Units, (3) Poured in Place Concrete,
(4) Colored and Regular Concrete Pavers, (5) Stucco, (6) Terrazzo, (7)
Concrete Blocks, (8) Colored Stamped Concrete, (9) Concrete
Ornamentals, (10) Cast Stone, (11) Concrete Historical Structures.
Concrete Sealing Products
CS-20 Plus is a molecular aqueous based penetrating polysiloxane sealer that
protects against; (a) efflorescence (alkali salts and lime leaching), (b)
staining due to atmospheric carbons, (c) algae, (d) mildew, (e) rust, (f) salts,
(g) chloride penetration, (h) corrosion, (i) acid rain, (j) dampness, (k)
waterproofing difficult basements or (l) below grade building walls and floors
or parking garages with water related damage. CS-20 Plus is frequently used on
commercial kitchens and garage floors over HydraSeal or HydraLoc where the
customer wants rapid water shedding, beading or easy ice removal. CS Plus is
recommend for use in Southern states for protection against UV
rays.
It can be applied to; (1) Pre-cast Concrete, (2) Concrete
Masonry Units, (3) Poured in Place Concrete, (4) Colored and Regular Concrete
Pavers, (5) Stucco, (6) Terrazzo, (7) Concrete Blocks, (8) Colored Stamped
Concrete, (9) Concrete Ornamentals, (10) Cast Stone, (11) Concrete Historical
Structures.
CSx-20
is a unique waterborne, non-flammable, Polysiloxane / Teflon penetrating surface
sealer. It is specifically engineered for areas that may be contaminated by
oil, grease, solvents, acids, paint, or to achieve a clean room environment.
CSx-20 will protect against moisture intrusion as well as oils, grease and other
solvents. This sealer is for rough concrete ONLY, in order to avoid slip
hazards. It can be applied to; (1) Concrete
that will have Contamination Spills, (2) Commercial Kitchen Floors, (3)
Plant or Shop Maintenance Areas, (4) Veterinary Clinics, (5) Kennels, (6) Dog
Runs or (7) Where there will be possible Animal
Contamination.
TECHNOLOGY: CSx-20 is a highly cost effective option to urethane or
epoxy coatings. It is a penetrating system that is not susceptible to UV
degradation. CSx-20 is a highly reactive cross-linked Polysiloxane / Teflon
formulation that penetrates ¼”- 1 ½” into the concrete. The formula attaches
itself to the substrate by electrochemical means. It forms a subsurface vapor
permeable elastomeric membrane. The membrane allows the treated matter to
breathe normally while impeding contaminants from spreading, wetting and
absorption through capillary channeling.
CSx-2O
Special is a unique waterborne, non-flammable polysiloxane/Teflon penetrating
sealer that will protect against moisture intrusion as well as oils, grease and
a variety of solvents. CSx-2O Special is formulated using %15 more Teflon and
Acrylic for special conditions such as truck and train wash racks, specialized
automotive and large engine shops where floors must take extreme pollution or
abrasion. It is also excellent for use in fertilizer plants and warehouses or
used where serious acid spills may be present as pollutants are held on the
surface for easy and rapid clean up. It is specifically designed for heavy
equipment and truck maintenance areas. This sealer is for rough concrete ONLY,
in order to avoid slip
hazards.
It can be applied to; (1) Concrete that will have Contamination Spills, (2)
Commercial Kitchen Floors, (3) Plant or Shop Maintenance Areas, (4)
Veterinary Clinics, (5) Kennels, (6) Dog Runs or (7) Where there will
be possible Animal Contamination.
TECHNOLOGY: CSx-20 is a highly cost effective option to urethane or
epoxy coatings plus it will not peel, blister or detach like most topical
coatings. It is a penetrating system that is not susceptible to UV
degradation. The CSx-2O Special formulation utilizes unique polysiloxanes
coupled with proprietary technologies to provide high performance that is also
environmentally safe. It is a highly reactive, cross-linked polysiloxane /
Teflon formulation that is capable of penetration rates ¼"- 1 ½" into the
concrete.
Concrete
Sealing Products (continued)
CSx-20 SPECIAL (continued) attaches itself to the substrate particles by
electrochemical means. During the curing process the system reacts with certain
elements in the concrete to form a subsurface vapor permeable elastomeric
membrane. The membrane allows the treated matter to breathe normally while
impeding contaminants from spreading, wetting and absorption through capillary
channeling.
Masonry Sealers
M-20 is a high tech, water based penetrating Polysiloxane sealer made
specifically for UNGLAZED clay masonry building faces, floors, walks and other
structures to protect against damage due to water penetration. M-20 provides
long lasting protection against (a) efflorescence (alkali salts and lime
leaching), (b) mold, (c) mildew, (d) rust, (e) salts, (f) chloride penetration,
(g) corrosion, (h) acid rain, (i) dampness, (j) staining due to atmospheric
carbons and (k) other water related damage. M-20 will shed or bead water from
all clay products
It can be applied to; (1) Clay
Brick, (2) Clay Block, (3) Clay “Saltillo Tile”, (4)
Clay “Quarry Tile”, or (5) Clay
Ornamentals.
M-2O
PLUS is a high tech, waterborne deep penetrating Polysiloxane sealer that is
fast acting and made specifically for GLAZED clay masonry building faces,
floors, walks and other structures to protect against damage due to water
penetration. M-2O PLUS will seal out moisture and still allow the clay product
to breath. It provides longer lasting protection against (a) efflorescence
(alkali salts and lime leaching), (b) mold, (c) mildew, (d) rust, (e) salts, (f)
chloride penetration, (g) corrosion, (h) acid rain, (i) dampness, (j) staining
due to atmospheric carbons and (k) other water related damage. M-20 PLUS will
shed or bead water from all clay products.
It can be applied to; (1) Clay Brick, (2) Clay Block, (3) Clay “Saltillo Tile”,
(4) Clay “Quarry Tile”, or (5) Clay
Ornamentals.
Stone
Sealers
NsT (NATURAL STONE SEALER) creates a silicone membrane, natural stone sealer.
It is specifically engineered for the treatment of natural stone for the purpose
of providing water repellency as well as long-term protect against exposure from
humidity and moisture. In addition Nst is resistant to acids and highly alkaline
compounds, and is formulated as a non-discoloring system. Nst also prevents
spotting and staining due to moisture and various liquids.
Lst
(LIMESTONE SEALER) is a Polysiloxane / co-polymeric penetrating sealer. It is
specifically engineered for the treatment of Limestone & Sandstone for the
purpose of providing water repellency, as well as long-term protection against
exposure from humidity and moisture. In addition LsT is resistant to acids and
highly alkaline compounds, and reduce or eliminate structural deterioration
where it is applied.
Stone
Sealers (continued)
LsT (continued) is a highly reactive, cross-linked polysiloxane co-polymer
formulation that is capable of substantial penetration rates into the stone. The
formula attaches itself to the substrate particles by electrochemical means.
During the curing process the system reacts with natural elements in the
substrate to form a subsurface vapor permeable elastomeric membrane. The
membrane allows the treated matter to breathe normally while impeding moisture
and contaminants from spreading, wetting and absorption through capillary
channeling.
Cleaners
and Maintenance Products
OIL-X-OUT is a biodegradable, severe duty concrete cleaner for oil saturated
slabs. Oil-X-Out is used in conjunction with GA Granule Accelerator to extract
oil from ten inches beneath the surface. It is recommended for; (1)
Auto Dealerships, (2) Truck Shops, (3) Diesel Engine Maintenance
Facilities, (4) Fabrication and Machine Shops, (5) Bank Drive Through Area's,
(6) Parking Lots, (7) Driveways, (8) Patio's and many more.
ALL
PURPOSE EFFLORESCENCE CLEANER is a peroxide-based cleaner used for the removal
of (a) efflorescence, (b) lime deposits, (c) atmospheric carbon and (d) metal
salt stains from brick, stone or concrete masonry. All Purpose Efflorescence
Cleaner reacts with and emulsifies the above listed elements and will not burn
the brick or concrete matrix. It can also be used on new masonry as well as
restoration or renovation applications. It is non-flammable, non-combustible and
does not contain MEK (Methyl Ethyl Ketone) or other solvents.
ALL
PURPOSE ORGANIC CLEANER is a water-based acid/oxidant that removes all organic
matter such as Mold, Mildew, Fungus and Algae, and also eliminates all musty
basement odors. After All Purpose Organic Cleaner cleans off all organic
materials will prep (etch the concrete surface) a concrete surface for sealing
without burning the brick or concrete matrix. All Purpose Organic
Cleaner can be used on new or old masonry as well as restoration/renovation
applications. It will remove organic matter from; (1)
Basement Paints, (2) Brick, (3) Concrete, (4) Stucco or (5) mortar
surfaces on new or old installations.
Note: All cleaned surfaces must
be sealed to avoid re-growth.
690
MULTI STRENGTH CLEANER is a concentrated, highly effective, aqueous based
compound cleaner for removing mortar, efflorescence, lime and salt stains from
porous, cementations limestone or clay brick. In addition to removing excess
mortar and smudges 690 Multi-Strength Cleaner is highly effective for removing
severe calcium carbonate build-up, lime deposits, atmospheric carbon, dirt, and
metal salt stains from clay brick, concrete masonry and limestone. It can be
used on new masonry or restoration / renovation applications. It is
non-flammable, non-combustible and does not contain MEK (Methyl Ethyl Ketone) or
other solvents. Our 690 Multi-Strength Cleaner is highly cost effective and has
superior efflorescence removal ability. It will not burn block, brick, or
limestone.
PAINT REMOVER will remove paint easily
without the strong odor of most paint stripping compounds as it is water-based
with no solvents. Apply one heavy application and let sit for 3-6 hours to break
down any painted surface. Note: After using this product, power wash the
surface to remove any residual after scraping the majority and disposing in same
manner as paint.
Cleaners
and Maintenance Products
MASTIC REMOVER will remove mastic easily without the strong odor of most
mastic removers. Apply one heavy application and let sit for 3-6 hours to break
down any painted surface.
DECK CLEANER is a specially formulated to remove mold, and algae from concrete or
wooden decks, while whitening the surface. Deck Cleaner will not streak when
pressure washed and continues to brighten the surface for weeks to come.
Stains
CSx-20 STAIN is a specifically formulated polysiloxane/ Teflon system that
protects concrete floors, driveways, and other structures against damage due to
water penetration and staining due to oils, grease and a variety of solvents.
CSx-2O Stain provides long lasting protection against (a) efflorescence (salt or
lime leaching), (b) staining due to atmospheric carbons, (c) algae, (d) mildew,
(e) metal, (f) salts, (g) chloride penetration, (h) corrosion, (i) most acids,
(j) acid rain, (k) caustic's, dampness and (l) other water related damage. This
sealer is for rough concrete ONLY in order to avoid slip
hazards.
CSx-2O Stain comes in 5 basic colors, Brick Oxide Red, White, Medium Gray,
Charcoal and Black. Note: Custom colors can be formulated for large orders.
Epoxies
EUREPOXY 630 CRACK REPAIR is an excellent flexible system for repairing
cracks in concrete surfaces where flexibility is mandatory and elongation is
required. Advantages: (a) comes in small or large packaging, (b) easy to mix,
mixer included, (c) no trowling or finishing necessary, (d) just mix and pour
until level. A self leveling concrete crack repair epoxy that is pour able and
will seep down into the lower reaches of the crack making is a perfect solution
for cracks or small pit mark repairs. It can be applied to; (1) Garage Floors,
(2) Driveways, (3) Patio's, (4) Plant Floors, (5) Basement floors, (6) Office
Floors, (7) Parking Decks, (8) Warehouse Floors and more. TECHNOLOGY:
EurEpoxy 630 is self tacking and has a tenacious bond to all clean concrete.
Elongation is 300%, Flexural is 3% at 12,000 to 16,000 psi.
Endur-O-Seal USA, Inc. is an environmentally conscientious company and uses
re-cycled polyethylene containers for shipping.
Product Components Are All Non-toxic & NON-HAZARDOUS.
Endur-O-Seal IS User Friendly AND Environmentally Safe.
|
